HKS Hipermax IV GT Suspension Subaru Legacy FA20DIT

HKS Hipermax IV GT Suspension Subaru Legacy FA20DIT
MAX IV GTCode No. 80230-AF004
 
 


▲The above photo is an item for ZN6.

Awesome control and comfort ride on the street for a sporty drive. The new Max IV sporty suspension.



Application Specification
EngineFA20(TURBO)
Model Year12/05 - 14/10
RemarksTest Vehicle:DIT
Vehicle's data are based on BRG.
 
 FRONTREAR
Damping force adjustment30 steps30 steps
Base valve--
Height adjustable lower bracket
Upper mountRubberRubber
Inverted/Normal typeInvertedNormal
Damper/Spring layoutCoiloverCoilover
Spring rate change at factoryPossiblePossible
Damping force adjustment with wire--
Helper spring
(Spring rate N/mm)
--


Ride Heightmm
 Factory *2Test dataAdjustable range
High - Low *3
Drivable range
High - Low *4
FRONTRide height *1668668688 ~ 618688 ~ 642
Against stock-40-40-20 ~ -90-20 ~ -66
REARRide height *1-672713 ~ 639713 ~ 672
Against stock--410 ~ -740 ~ -41
*1. Height from road surface to fender arch.
*2. Height at factory is the data tested at HKS with the setting of Full Kit. (HKS' recommended setting.)
*3. Adjustable range (However, the lowest value may not be road legal.
Even within the adjustable range, car body, arm etc. may contact. In such case, it will be hard to drive.
Damper oil leakage or any other problems caused by low ride height setting from the factory setting will void the warranty of the product.)
*4. Drivable range that there is no contact of car body or arms etc. (However, change of tire/wheel size may cause a problem.)
Caution). Actual data depends on each vehicle.


Kit information
Spring of Full Kit
 FR
Spring rate N/mm(kgf/mm)59 ( 6 )69 ( 7 )
Free height (mm)220200
Spring typeStraight Barrel typeStraight
Recommended range to change spring rate N/mm(kgf/mm)-10+20(-1~+2)-10+20(-1~+2)
Specification of damper
 FR
Damping force (Rebound/Damping)N*843 / 157559 / 147
Default position of dial1515
Remaining damper stroke (Rebound/Damping)mm56 / 5745 / 55
* The value of the damping force is at piston speed of 0.1m/sec.
Setting data
 FR
DefaultTestDrivable limit
High *
Drivable limit
Low *
DefaultTestDrivable limit
High *
Drivable limit
Low *
Length of
case (mm)
327341308240243263243
Spring
Set length(mm)
215210220198200189200
Length to ride hight
adjuster (mm)
1161359239407140
Lever ratio1.071.30
* Refer to the above explanation *3 of ride height information for drivable high and low limitations.


Test vehicle information
 FR
Vehicle weight kg911669
Tire size (Air pressure) kPa245 / 35 - 19 ( 270 )245 / 35 - 19 ( 260 )
Wheel size8.0 JJ × 19 off 488.0 JJ × 19 off 48
Alignment
(Toe/Camber)
Test data0 mm / -0°48'0 mm / -1°36'
Standard value0 ± 3 mm / -0°15' ± 45'0 ± 3 mm / -1°00' ± 45'
* Test data at HKS.


Parts List * It may be changed without prior notice.


Point
・Increasing 1 kg of spring rate of front and rear from MAX III enhances the stability during high speed driving furthermore.
・Focusing on the ride quality leads to the product quality improvement, and gradual suspension movement is pursued.
・Adequate posture change and supple damping strike balance between riding comfort and sportiveness while maintaining the vehicle's high-quality image.
・Smooth and non-fluffy vehicle movement is provided so driving becomes comfortable for all passengers.
・Soft and gradual movement enables the driver easily to know the load changes so a car becomes more capable of fast cornering on a winding road.
・Recommended dial position is 10 in front and 15 in rear. Adjust the dial to 20 in front and 25 in rear for relaxing driving.
・The vehicle height is only calculated numbers except the height at the test. (It does not guarantee the actual height.) 
・To install this product to BRG, extend the rear damper length by 3mm so the case length becomes 243mm. Do not adjust the case length shorter than 243mm to prevent the brake hose from coming in contact with this product at full bump.
・-41mm is the maximum amount BRG's rear can be lowered with this product. Using the Helper Spring Set can lower the rear height up to -54mm. (Helper Spring Set is available separately.)

For over 40 years, HKS products have been put to the test in drag racing, road racing, rallying, and top speed trials. HKS equipped vehicles have captured numerous racing championships and hold claim to a myriad of competition records using many “off the shelf”, race proven HKS components. As a result, HKS has been synonymous with “performance” in the automotive aftermarket industry for the past 40+ years.

This product is compatible with the following vehicles

Vehicle Make Vehicle Model Vehicle Variant From To Engine Notes
Subaru Legacy 2009 EJ25 2.5L - 4WD Petrol
Subaru Legacy Outback 2009 EJ255 2.5L - 4WD Petrol

Whether it is engine, exhaust, suspension, or drive-train systems, there is no substitute for the performance, quality and reliability of HKS. Part-Box/Co-ordSport are an approved distributor for HKS performance and tuning products.

For over 35 years, HKS products have been put to the test in drag racing, road racing, rallying, and top speed trials. HKS equipped vehicles have captured numerous racing championships and hold claim to a myriad of competition records using many “off the shelf”, race proven HKS components. As a result, HKS has been synonymous with “performance” in the automotive aftermarket industry for the past 35+ years.


Write a review

Please login or register to review
  • Product Code: 80230-AF004
  • Availability: In Stock
  • RRP: £1,860.00 (incl. Tax)
  • Ex Tax: £1,550.00

Tags: HKS-Hipermax-IV-GT-Suspension